Hr 7308: A unique Cepheid

Numerical models of Cepheids have been computed with a range of effective temperatures and compositions. The amplitudes increase if the helium abundance increases or if the effective temperature decreases. The latter effect is contrary to observational data. The models also exhibit velocity amplitudes which are much lower than those observed.     

Search radar detection and track with the Hough transform. II.detection statistics

For pt.I see ibid., vol.30, no.1, (Jan.1994). This paper describes the calculation of P_F and P_D for the Hough transform technique when the primary threshold crossings are weighted by their power before transforming (i.e., noncoherent integration). After expressions for P_F and P_D are derived, we examine the question of optimal granularity of the Hough accumulator space. We also investigate the relationship between primary and secondary thresholds and its effect on detectability     

X-ray scattering by intergalactic dust

The imaging capabilities of the Exosat and Einstein satellites at soft X-ray wavelengths have begun to show that suitable Galactic X-ray sources have extended ( 10 arcmin) haloes due to scattering of soft X-rays by interstellar dust. A simple argument suggests that similar haloes, due to scattering by intergalactic dust, should exist around distant (z 1) quasars and detailed analysis confirms this conclusion. A search for such haloes around suitable X-ray quasars could provide valuable, model-independent, constraints on the amount and origin of intergalactic dust.     

Nonlinear Adaptive Control of a Synchronous Machine

A nonlinear adaptive controller for a load-commutated brushless dc machine that allows the machine to develop high torque over a wide range of operating conditions, while satisfying voltage and current constraints on both stator and field circuits, is presented. The approach taken is fundamentally different from past work in that a nonlinear control is formulated from the steady-state model of the synchronous machine. Adaptive algorithms are presented for both the unknown load and motor cases.     

Control of microorganisms in flowing nutrient solutions.

Controlling microorganisms in flowing nutrient solutions involves different techniques when targeting the nutrient solution, hardware surfaces in contact with the solution, or the active root zone. This review presents basic principles and applications of a number of treatment techniques, including disinfection by chemicals, ultrafiltration, ultrasonics, and heat treatment, with emphasis on UV irradiation and ozone treatment. Procedures for control of specific pathogens by nutrient solution conditioning also are reviewed.     

Results from the ESA SREM monitors and comparison with existing radiation belt models

The Standard Radiation Environment Monitor (SREM) is a simple particle detector developed for wide application on ESA satellites. It measures high-energy protons and electrons of the space environment with a 20° angular resolution and limited spectral information. Of the ten SREMs that have been manufactured, four have so far flown. The first model on STRV-1c functioned well until an early spacecraft failure. The other three are on-board, the ESA spacecraft INTEGRAL, ROSETTA and PROBA-1. Another model is flying on GIOVE-B, launched in April 2008 with three L-2 science missions to follow: both Herschel and Planck in 2008, and GAIA in 2011). The diverse orbits of these spacecraft and the common calibration of the monitors provides a unique dataset covering a wide range of B-L* space, providing a direct comparison of the radiation levels in the belts at different locations, and the effects of geomagnetic shielding. Data from the PROBA/SREM and INTEGRAL/IREM are compared with existing radiation belt models.     

Aperture Sampling Techniques for Precision Direction Finding

The resolution and tracking of radar targets which are close to. gether is a classical problem which is receiving increased attention. Improving the angular resolution by sampling the received wave front along the aperture and then applying modern "high resolution" spectrum estimation techniques (e. g., maximum likelihood and maximum entropy processing) to the spatial sample data is discussed. Experimental results are presented for the application ion of these techniques to field data from a L- band line array.     

Microwave Landing System

The National Microwave Landing Systems (MLS) program is a joint DOT/DOD/NASA effort to implement a common civil/military precision landing system to replace the current Instrument Landing System (ILS). The MLS will be capable of providing precision landing guidance down to Category III minimum while allowing for complex approach paths in both the horizontal and vertical planes. The system is based on the Time Reference Scanning Beam (TRSB) technique which was selected by the International Civil Aviation Organization (ICAO) in April 1978 as the new international landing system standard. MLS is less susceptible to interference from the surrounding area and provides a greater signal coverage area than ILS.     

A review of long drop tubes as a supplement/alternative to space experiments

The 100 meter high drop tube at the Marshall Space Flight Center has proven to be a viable facility for studies of containerless solidification. Advantages are that experiments are inexpensive and large numbers of specimens can be processed rapidly. It would not be unusual to run ten specimens in a day. Another significant advantage is that the undercooling behavior can be followed with sufficient sensitivity to easily detect the onset of recalescence and subsequent events.Disadvantages are the restrictions on specimen sizes and types of alloys that can be run in a microgravity environment. Practical specimen sizes range between 50 mg and 500 mg depending on the type of furnace being used. Refractory alloys can be processed in a vacuum (about 10^?5 torr) and therefore at microgravity. Non-refractory alloys demand an atmosphere (about 200 torr) to obtain appreciable undercooling before impact at the bottom of the tube. Under these conditions significant g forces result.Because of the present limitations of the 100 meter drop tube, the most definitive work has been done on niobium based alloys. Large amounts of undercooling have been observed routinely and the effects of undercooling on microstructure have been characterized in detail. X-ray diffraction, scanning electron microscopy, and transmission electron microscopy have been used to determine types of phases, amounts of phases, and compositions of phases. It is clear, as would be expected, that the results bear some resemblance to rapid solidification processing by quenching. However, there are dissimilarities due to the uniqueness of solidification by deep undercooling without quenching in long drop tubes and accompanying recalescence effects.     

Role of calcium in gravity perception of plant roots

Calcium ions may play a key role in linking graviperception by the root cap to the asymmetric growth which occurs in the elongation zone of gravistimulated roots. Application of calcium-chelating agents to the root cap inhibits gravitropic curvature without affecting growth. Asymmetric application of calcium to one side of the root cap induces curvature toward the calcium source, and gravistimulation induces polar movement of applied ⁴⁵Ca²⁺ across the root cap toward the lower side. The action of calcium may be linked to auxin movement in roots since 1) auxin transport inhibitors interfere both with gravitropic curvature and gravi-induced polar calcium movement and 2) asymmetric application of calcium enhances auxin movement across the elongation zone of gravistimulated roots. Indirect evidence indicates that the calcium-modulated regulator protein, calmodulin, may be involved in either the transport or action of calcium in the gravitropic response mechanism of roots.